1000C KX-VS-VS-0.81 Vitreous Silica Insulated Thermocouple Cable Type K Wire
For the extension/compensation cable, the basic structure is conductor and insulation.
To increase its temperature bearing ability and to install easily, jacket is applicable.
In the working environment, there are too much factors will interference the EMF signal, therefore shield layer is practical way to prevent the cable from interference caused by complex environment.
1. The Compensation Wire Name and Code
| Compensation Alloy Wire Name | Positive | Negative | ||
| Name | Code | Name | Code | |
| Copper-Copper Nickel 0.6 | Copper | SPC | Copper Nickel 0.6 | SNC |
| Copper-Copper Nickel 0.6 | Copper | RPC | Copper Nickel 0.6 | RNC |
| Iron-Copper Nickel 22 | Iron | KPCA | Copper Nickel 22 | KNCA |
| Copper-Copper Nickel 40 | Copper | KPCB | Copper Nickel 40 | KNCB |
| Chromel-NiSi3 | Ni90Cr10 | KPX | Ni97Si3 | KNX |
| Iron-Copper Nickel 18 | Iron | NPC | Copper Nickel 18 | NNC |
| NiCr14Si-NiSi4Mg | NiCr14Si | NPX | NiSi4Mg | NNX |
| NiCr10-Copper Nickel 45 | NiCr10 | EPX | Copper Nickel 45 | ENX |
| Iron-Copper Nickel 45 | Iron | JPX | Copper Nickel 45 | JNX |
| Copper-Copper Nickel 45 | Copper | TPX | Copper Nickel 45 | TNX |
2. How To Choose Thermocouple
| Type | Insulation material | CODE | Inner Shielding | CODE | JACKET | CODE | Out shielding | CODE | Pairs | solid | Earth wire | Stranded |
| K | FEP | FP | FEP | FP | 0 | 0.2mm | E | cross section+R | ||||
| T | PFA | FA | Al foil | AL | PFA | FA | copper wire | CU | 2 | 0.3mm | ||
| E | PVC 70ºC | LP | copper wire | CU | PVC 70ºC | LP | Tinned copper | TC | 3 | 0.5mm | ||
| J | PVC 105ºC | HP | Tinned copper | TC | PVC 105ºC | HP | Nickel plated copper | NC | 4 | 0.75mm | ||
| N | Fiberglass 400ºC | BL | Nickel plated copper | NC | Fiberglass 400ºC | BL | Silver plated copper | AC | 5 | 1.0mm | ||
| SC | Fiberglass600ºC | BM | Silver plated copper | AC | Fiberglass600ºC | BM | SS 304 wire | SS | 6 | 1.5mm | ||
| Fiberglass700ºC | BH | Fiberglass700ºC | BH | |||||||||
| MICA FIBER 650ºC | MA | |||||||||||
| KCA | Vitreous Silica 800ºC | VS | SS 304 wire | SS | Vitreous Silica 800ºC | VS | 7 | 2.5mm | ||||
| KCB | Silica fiber1000ºC | SV | Inconel 600 wire | 600 | Silica fiber1000ºC | SV | 8 | |||||
| RTD | Ceramic fiber1200ºC | CF | Inconel 625 wire | 625 | Ceramic fiber1200ºC | CF | 9 | |||||
| PTFE | PT | PTFE | PT | |||||||||
| ETFE | ET | ETFE | ET | |||||||||
| KAPTON | KP | KAPTON | KP | |||||||||
| Silcone rubber | SR | Silcone rubber | SR | |||||||||
| Rubber | RU | Rubber | RU | |||||||||
| PE | PE | PE | PE |
The Position Wire VS Pt Nominal Thermoelectromotive Force Vaule Reference
| Extension Cable Code | Alloy Wire Code | Application Classifica-tion | Measurement Terminal Temperature (ºC) | Nominal Thermoelectrom-otive force(μV) | Precision Grade Thermoelectrom-otive force(μV) | Normal Grade Thermoelectrom-otive force(μV) | ||
Tolera- nce | Value Range | Toler- ance | Value Range | |||||
| SC or RC or KCB | SPC or RPC or KPCB | G | 100 | 773 | ±10 | 763~783 | ±12 | 761~785 |
| H | 100 | 773 | - | - | ±12 | 761~785 | ||
| 200 | 1837 | - | - | 1825~1849 | ||||
| TX | TPX | G | -25 | -135 | ±10 | -125~-145 | ±12 | -123~-147 |
| 100 | 773 | 763~783 | 761~-785 | |||||
| H | -25 | -135 | ±10 | -125~-145 | ±12 | -123~-147 | ||
| 100 | 773 | 763~783 | 761~785 | |||||
| 200 | 1837 | 1827~1847 | 1825~1849 | |||||
| KX | KPX | G | -25 | -626 | ±29 | -597~-655 | ±57 | -569~-683 |
| 100 | 2856 | 2827~2885 | 2799~2913 | |||||
| H | -25 | -626 | ±29 | -597~-655 | ±57 | -569~-683 | ||
| 100 | 2856 | 2827~2885 | 2799~2913 | |||||
| 200 | 5978 | 5949~6007 | 5892~6035 | |||||
| EX | EPX | G | -25 | -626 | ±34 | -592~-660 | ±55 | -571~-681 |
| 100 | 2814 | 2780~2848 | 2759~2869 | |||||
| H | -25 | -626 | ±34 | -592~-660 | ±55 | -571~-681 | ||
| 100 | 2814 | 2780~2848 | 2759~2869 | |||||
| 200 | 5970 | 5936~6004 | 5915~6025 | |||||
| NX | NPX | G | -25 | -368 | ±29 | -339~-397 | ±56 | -312~-424 |
| 100 | 1784 | 1755~1813 | 1728~1840 | |||||
| H | -25 | -368 | ±29 | -339~-397 | ±56 | -312~-424 | ||
| 100 | 1784 | 1755~1813 | 1728~1840 | |||||
| 200 | 3943 | 3914~3972 | 3887~3999 | |||||
2. Size Range Reference
3. Production Progress
4. Package Reference
5. Our Service
6. Questions and Answers
Q1:How can I contact with your company?
A1:We have multiple communication channels
Q2:Do you provide free samples?
A2:Yes,we can provide free samples for your testing,but buyer should bear the shipping costs.
Q3:What is your payment terms?
A3:30% in advance,balance after receiving the copy of B/L. T/T,L/C,Western Union,Paypal is OK.
Q4:What is your lead time?
A4:On normal condition,the lead time is 7 days after the payment. Special order or quantity is subject to the negotiation.
Q5:What is your working time?
A5: Monday to Firday: 9:00-12:00,13:30-17:30, rest in weekend.